Today’s Tip: Test Your Smoke and CO Alarms
Smoke and carbon monoxide (CO) alarms are your first line of defense against two of the deadliest household hazards: fire and toxic gas. Both give you precious extra minutes to escape in an emergency, but only if they’re working. In our restoration and remediation work, we’ve seen tragedies that could have been avoided with a simple monthly test.
Signs to watch for
- Press the test button and listen for a loud, clear alarm.
- Check the manufacturing date on the back—replace smoke alarms every 10 years and CO alarms every 5–7 years.
- Look for dust buildup around sensors, which can affect performance.
- If hardwired, verify the backup battery is installed and functional.
How to address the issue
- Press and hold the test button until the alarm sounds.
- If the sound is weak or absent, replace batteries immediately.
- Vacuum the exterior to remove dust and cobwebs.
- Replace the entire unit if it fails to sound or is past its service life.
- Test all alarms in the home—hallways, bedrooms, and living areas.
Why this matters
A non-functioning alarm leaves you without early warning in a fire or CO leak, greatly increasing injury or death risk.
Maintenance tips
Test alarms monthly, replace batteries at least once a year, and replace entire units on schedule.
Related reading
- Clean Your Dryer Vent Duct (Aug 11, 2025)
- Replace Worn Weatherstripping on Doors (Aug 14, 2025)
- Browse more tips on our blog
Need help with repairs or restoration? Call DKI - Burlington for 24/7 service across Burlington, Oakville, Milton, and Halton Region.
Don’t hesitate – call us now: 905-681-6100 | Click HERE to get a Free Quote!