Why Garage Floors Crack and Heave After a Hard Winter | DKI - Burlington

Cracked and heaved concrete garage floor in early spring with visible displacement along crack lines
Frost heave in the subgrade beneath garage slabs causes cracking and displacement that becomes visible as temperatures rise in spring

Why garage floors crack differently than other concrete

Garage floors are among the most frost-vulnerable concrete surfaces in a residential property. Unlike basement slabs, which sit below the frost line and are insulated by the surrounding structure, garage floors are typically poured at or near grade level with minimal insulation beneath them. This exposes the subgrade directly to freezing temperatures through the winter months.

When moisture in the soil beneath a garage slab freezes, it expands. Fine-grained soils such as silts and clays are particularly prone to forming ice lenses — concentrated layers of ice that grow as they draw additional moisture upward from deeper soil. The upward pressure exerted by these ice lenses can be substantial enough to lift and fracture a concrete slab from below.

How a hard winter sets the stage

A winter with repeated deep freeze events followed by partial thaws creates ideal conditions for frost heave. Each freeze cycle allows ice lenses to grow. Partial thaws introduce additional moisture into the subgrade before the next freeze, feeding further ice formation. By the time spring arrives and the ground thaws completely, the subgrade beneath the slab may have shifted significantly from where it began in the fall.

As the ice melts, the soil that was displaced does not always return to its original position. Voids can form beneath sections of the slab, leaving unsupported concrete that cracks under its own weight or under the load of vehicles. Sections that were pushed upward may remain slightly elevated, creating the uneven surfaces and trip hazards that become apparent in March and April.

What heaved garage floors mean for water

Cracked and displaced garage slabs create direct pathways for water entry. Spring meltwater running across a garage floor finds cracks immediately and follows them into the subgrade or, in attached garages, toward the foundation wall. Where the slab meets the garage foundation, displacement can open gaps that allow water to work toward the interior of the home.

Attached garages present an additional concern. Water that enters through a heaved slab and migrates toward the shared wall between the garage and living space can affect insulation, wood framing at the base of walls, and interior finishes without producing immediately obvious signs indoors.

Signs that frost heave has affected a garage slab

  • New cracks appearing in spring that were not present the previous fall, often running diagonally across the slab.

  • Sections of floor that are visibly higher or lower than adjacent areas, creating an uneven surface.

  • Gaps opening between the slab edge and the garage foundation wall or door threshold.

  • Water pooling in low areas of the garage floor during snowmelt that previously drained normally.

Why assessment matters before repairs begin

Surface patching of frost-heaved concrete addresses appearance but not the underlying cause. If subgrade moisture and drainage conditions are not evaluated, the same freeze-thaw cycle will repeat the following winter and new cracking will follow. A professional assessment can determine whether subgrade stabilization, improved drainage, or slab replacement is the appropriate response — and whether water has already migrated into areas connected to the home's interior.

Need help now?

We’re on call 24/7 for water, fire, and mould emergencies across Burlington and area.

Call us now: (905) 681-6100 or Request service online